Memorial Field
- Trevor Fultz
- Fanessa Harbst
POWERING ON THE PRESS BOX AUDIO SYSTEM
Switch the toggle button labeled “SYSTEM POWER” into the up position. The toggle is labeled “ON” and “OFF”
PLAYING MUSIC THROUGH THE AUDIO SYSTEM
To connect via Bluetooth, press and hold the button labeled “PAIRING” then select “DN-300Z” on your device. Adjust bluetooth volume by sliding the sub-master labeled “Denon - Media 7/8” on the the mixer up or down.
To connect via AUX cable (cables in the bottom drawer), plug one of the two aux cables into your device’s headphone port. Adjust volume using the sub-master that corresponds to the cable number you’re using.
To play Radio/CD/SD card/USB press the button labeled “MEDIA” until you see your desired source in the display. Next push the round knob on the far right to “ENTER” your selection.
Adjust volume for selected media by sliding the sub-master labeled “Denon - Media 7/8” up or down.
PRESS BOX MICROPHONES
There are two stand microphones labeled “MIC 1” and “MIC 2”
Push the button on the base of the mic to activate it. The light will turn green when active. Push again to mute the microphone. The light will go dark.
Volume levels can be adjusted for each of these mics in the audio rack. Slide the sub-master up or down for the corresponding microphone.
WIRELESS MICROPHONES
There are two wireless microphones located in the bottom drawer of the audio rack. They are labeled “WIRELESS 1” and “WIRELESS 2”
Hold the power button to turn on the microphone (the light above the button will turn green). Hold again to turn the mic off.
Volume levels can be adjusted for each of these mics in the audio rack. Slide the sub-master up or down for the corresponding microphone.
The wireless microphones do no have a mute option. You must hold the power button to turn off the microphone to mute it.
If there are any questions or issues please contact IT Services